The frame is printed in Taulman Nylon which includes the attached AIO battery mount, motor protectors and frame stiffener.
The frame also has a built in camera mount that the camera snaps in to. It is recommended to put a dab of hot glue on the bottom of the lens to keep the camera from rotating.
Frame weight with camera mount, battery mount, motor protectors and frame stiffener is 6.4 grams
Part List
Frame |
Phoenix 3D Solutions
Phx-3d.com
|
See Site |
Flight Controller |
BeeBrain V2 Micro FPV Flight Controller
Newbeedrone.com
|
$24.99 |
Motors |
4 x CL-0615-17 coreless motor (speed: faster)
(4 builds)
Micro-motor-warehouse.com
|
$92.00 |
FPV Camera |
FX805 25mw FPV Pod with Free Upgraded Camera Mount
(3 builds)
Tinywhoop.com
|
$40.00 |
Batteries |
*Lipo 205mAh 3,8V 25C/50C HV 4,35V spezial Stecker PWConnector TinyWhoop
(2 builds)
Mylipo.de
|
$4.99 |
Radio |
Horus X12S - FrSky - Let You Set The Limits
Frsky-rc.com
|
See Site |
Great job on build, i wanna do a micro for indoor/outdoor
Thanks! Yep those micro and minis are big fun.
how much is those frames? my son has eachine e010 and we both keep breaking the frames but the delrin frames are so expensive and rakon is ridiculous for frames
thanks! they are just 10$and I couldn't break it till now :) or you can even print it on your own.
buy it here: https://www.phx-3d.com/product-page/goldberg-frame-tiny-whoop
or print it with this files: https://www.thingiverse.com/thing:2012458