190-MAKA-SX Stretch X 1407 Build (160g)

By wklee.fpv on Jun 21, 2017

7  256  0

3DPOWER 190-MAKA-SX Stretch X FPV Racing Quadcopter Frame
Matek F405-OSD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for SBUS Input
Spedix 30a 4 in 1 Dshot 600 BlHeli_S ESC
BrotherHobby T1 Tornado 1407 3600kv FPV Motor
Kingkong 4045 4x4.5 Inch Propellers
RunCam Swift Micro
Eachine VTX03
Frsky XM+

Weight: ~160g

Photos

Part List

Frame

3DPOWER 190-MAKA-SX Stretch X FPV Racing Quadcopter Frame (3 builds)
Taco-rc.com
$49.99

Flight Controller

Matek F405-OSD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for SBUS Input (100 builds)
Taco-rc.com
$27.99

ESCs

Spedix 30a 4 in 1 Dshot 600 BlHeli_S ESC for FPV RACING (89 builds)
Taco-rc.com
$44.99

Motors

4 x BrotherHobby T1 Tornado 1407 3600kv FPV Quad Motor For FPV Racing (196 builds)
Taco-rc.com
$63.96

Propellers

10 Pairs Kingkong 4045 4x4.5 Inch PC Fiberglass Propellers CW CCW for Multicopter (4 builds)
Taco-rc.com
$4.59

FPV Camera

RunCam Micro Swift 600TVL 2.1/2.3mm IR Blocked 1/3 CCD FPV Camera PAL/NTSC 5.6g (199 builds)
Taco-rc.com
$29.99

FPV Transmitter

Eachine VTX03 Super Mini 5.8G 72CH 0/25mW/50mw/200mW Switchable FPV Transmitter (426 builds)
Taco-rc.com
$16.99

Antenna

3DPOWER 5.8Ghz 5G8 Linear Antenna w/ IPX U.FL connector (16 builds)
Taco-rc.com
$4.99

Receiver

Frsky XM+ Micro D16 SBUS Full Range Receiver Up to 16CH (1368 builds)
Taco-rc.com
$12.99

Batteries

Infinity 850mah 14.8V 70C 4S1P Race Spec Lipo Battery for FPV Racing (6 builds)
Taco-rc.com
$18.99

Radio

FrSky R9M 900MHz Long Range Transmitter Module (2 builds)
Taco-rc.com
$59.99

HD Camera

Runcam Split 2 HD FPV Camera + Wifi Module + GoPro Quality Lens (81 builds)
Taco-rc.com
$79.99

HD Camera

GoPro Hero5 Session (197 builds)
Amazon.com
$249.00

HD Camera

GoPro HERO5 Session (197 builds)
Getfpv.com
$199.99

Radio Module

TBS Crossfire Micro TX (102 builds)
Team-blacksheep.com
$69.95
Show stores (4)

Discussion

Sign in to comment

Guides & Reviews

28 2,368  33
26 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
26 6,926  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more