I decided to build bumper with all parts inside the frame. Ill keep you updated
Frame |
Bumper Frame
(11 builds)
Armattanquads.com
|
$20.00 |
Flight Controller |
Lumenier MICRO LUX F4 Flight Controller
(5 builds)
Getfpv.com
|
$19.99 |
ESCs |
Lumenier Mini BLHeli_S 10A 4-in-1 OPTO ESC DSHOT
(5 builds)
Getfpv.com
|
$34.99 |
Motors |
4 x dys BE1104 7500KV Micro Brushless Motor - $10.62 |GearBest.com
(48 builds)
Gearbest.com
|
$42.48 |
Propellers |
HQProp 1.9x3x3 PC White Quad Propeller - Set of 4 (2x CW, 2x CCW)
Getfpv.com
|
$1.87 |
FPV Camera |
Eachine Fatbee FB90 Micro Racing Quadcopter Spare Parts 5.8g 25MW 48CH VTX 520TVL CMOS 1/4 Camera
(3 builds)
Banggood.com
|
$25.99 |
Receiver |
FrSky XM+ SBUS Mini Receiver
(1149 builds)
Getfpv.com
|
See Site |
Batteries |
Turnigy nano-tech 450mAh 3S 65C Lipo E-Flite Blade 180 CFX Battery EFLB4503SJ30
Ebay.com
|
See Site |
HD Camera |
Original iMars™ Mini Camera SQ11 HD Camcorder HD Night Vision 1080P Sports Mini DV Video Recorder
(2 builds)
Banggood.com
|
$10.39 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Hi there! I have followed your build and pretty close to done with it... still waiting for the cam and vtx. I have motors wired to the esc and fc is connected and I can connect to betaflight and run the motors and stuff. The receiver is not yet connected.
Here is my problem... when I spin the motors, it seems to spin CW and CCW... Upon research, the ESC is capable of bidirectional spin. Upon more research, I think once I bind to a receiver and default to angle mode, the motors will be spinning 1 direction only. I am kind of hoping for that.
What was your experience? Did you have any trouble like me? I am still a noob with building... any tips? Thank you in advance.
Hey, I'm not the builder but thoughts on motor spin direction. They will not all spin in one direction when in angle mode. They have to spin in the direction that is on the BetaFlight motors screen. 2 CW and 2 CCW. You can download the "BL Heli Suite" to change the direction that each motor spins and you almost always have to do this.
Thx man. I got it figured out. I am much better builder now and i was confused at the time. It is flying good now. But man... it is loud...