This is now an age old frame... not many folks run it anymore seeing as how so many lighter frames are available. Yet once upon a time this was tank... still is. This was one of the earlier builds that I actually put some attention to when building... built 2 years ago.
Frame |
ZMR250 V2.2 250mm Carbon Fiber Mini FPV Quadcopter Frame Kit with PCB Board and LED
(6 builds)
Fpvmodel.com
|
$53.09 |
Flight Controller |
AfroFlight Naze32 Rev5 Acro FunFly Controller
(25 builds)
Hobbyking.com
|
$26.51 |
ESCs |
4 x DYS BLHeli 20A-OPTO ESC
Helipal.com
|
$43.60 |
Motors |
4 x Cobra CM-2208 2000kv Motor
(4 builds)
Getfpv.com
|
$75.96 |
Propellers |
HQ Prop 6045 Propeller
(7 builds)
Store.rotorriot.com
|
$2.59 |
FPV Camera |
FatShark 700TVL V2 CMOS Cam Fixed Mount #1204
(7 builds)
Readymaderc.com
|
$14.99 |
FPV Transmitter |
ImmersionRC Raceband 5.8GHz 600mW A/V Transmitter
(10 builds)
Getfpv.com
|
$48.99 |
Antenna |
Fatshark immersionrc spironet antenne rhcp de 5.8ghz tx rx ensemble
(13 builds)
Banggood.com
|
See Site |
Receiver |
FrSky XSR 2.4GHz 16CH ACCST Receiver w/ S-Bus & CPPM
(480 builds)
Getfpv.com
|
See Site |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Cool! On a side note, what do you think of the AIO flight controllers? They look really convenient.
Oh they work fine nowadays.. great for weight savings and improves component balance in terms of placement within the frame. Might help to perhaps also consider stacking options.
Such as Magnum , fly Tower etc 😊