The frame that keeps on giving.
Frame |
Chameleon
(164 builds)
Armattanquads.com
|
$90.00 |
Flight Controller |
RaceFlight Revolt F4 Flight Controller - V2 with bobbins!
Readymaderc.com
|
$30.99 |
ESCs |
FlightOne Store
(46 builds)
Shop.raceflight.com
|
$19.95 |
Motors |
4 x Hypetrain Freestyle 2306 2450KV Motor (V1.1)
(96 builds)
Store.rotorriot.com
|
$79.96 |
Propellers |
HQProp DP 5x4x3 PC V1S Light Green Propeller - 3 Blade (2CW+2CCW/Bag)
(13 builds)
Getfpv.com
|
$3.99 |
FPV Camera |
RunCam Swift 2 (2.5mm lens) - Orange
(412 builds)
Getfpv.com
|
$34.99 |
FPV Transmitter |
TBS Unify Pro 5G8 V3 (SMA)
(154 builds)
Team-blacksheep.com
|
$39.95 |
Antenna |
TBS Triumph-Stub SMA (RHCP 2pcs)
(143 builds)
Team-blacksheep.com
|
$39.95 |
Receiver |
FrSky XSR 2.4GHz 16CH ACCST Receiver w/ S-Bus & CPPM
(480 builds)
Getfpv.com
|
See Site |
Batteries |
Turnigy Graphene 1300mAh 4S 65C Lipo Pack w/XT60
(112 builds)
Hobbyking.com
|
$20.99 |
HD Camera |
GoPro HERO Session
(10 builds)
Videocamerashop.nl
|
$229.00 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
How’s it fly? You got a channel? And how’s the wiring on it?
https://www.youtube.com/channel/UCjD4JnzDq29P9YRMHvfBR1A
I'm more active on Instagram: andy_lang_44.
It flies great on stock tune, though I've just updated the firmware so I'll have to see how it works out!
Did you use wires or the stock legs on the caps? Also any problems ???
I used about 20mm of 14 gauge wire instead of the legs. Absolutely no problems on stock settings and rates, clean video etc. I've recently upped my rates so I'm getting a little bounce back, but nothing a little tuning won't sort out!
Where did you cut?
See the latest photo, as close to the capacitor base as possible.