5 inch toothfairy build to replace my 6 inch floss
Frame |
HyperLite Tooth Fairy 5" Race Frame
(16 builds)
Pirofliprc.com
|
$26.99 |
Flight Controller |
HGLRC XJB F428-TX20 Omnibus F4 Flight Controller 28A 2-4S Blheli_S ESC 25/100/250mW Switchable VTX
(26 builds)
Pirofliprc.com
|
$71.99 |
Motors |
4 x HyperLite V2 Team Edition 2205-2522
(13 builds)
Pirofliprc.com
|
$55.96 |
FPV Camera |
RunCam Micro Swift 2 Orange 2.1 Lens
(49 builds)
Pirofliprc.com
|
$26.99 |
Receiver |
XM PLUS (Mini SBUS Non-telemetry Full Range)
(1149 builds)
Pirofliprc.com
|
$12.99 |
Radio |
FrSky 2.4G ACCST System Taranis Q X7 16 Channels Transmitter Remote Controller White Battery and Battery Trays Not Include
(263 builds)
Amazon.com
|
$124.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
have you flown it yet?
I have flown it .it handles quite snappy due to it being shorter. I love the toothfairy frame. It was a learning curve for the 20x20 stack i had the positive wire rip out twice. Ive since ran smaller guage wire and soldered the living shit out of it
if you are going to go 'big' on the xjb stacks its a good idea to take a bit of 20g wire twisted and loop it through the Vbat pads.. then soldier the shit out of both sides and trim it.. this was you can run 16g wire and 'real' motors with out creating a bottle neck or ripping off pads.. i just finished my custom uni body 5" built wit the f428 stack.. its pretty rad !
Could i possibly check out some pics of the way the wires are routed? Sounds rad. Been on vacation in the philippines. Cheap beer! Good times!