"Zip-Zip" 3 Inch Eclair Pro w/ Runcam Split

By Burghamer on Mar 10, 2018

4  708  5

3" Eclair Pro w/ Runcam Split
Estimated AUW was @ 230-240 grams depending on battery size
Actual is AUW 245-260

Lots of Charpu Tape and Zip ties

Freshly loaded with Butterflight, just waiting for the snow to melt....


Part List


AirBlade Eclair V2 3-inch LITE and PRO 3K Carbon Fiber Frame Kit3 inch LITE (19 builds)

Flight Controller

Holybro Kakute F4 AIO V2 Flight Controller (21 builds)


4 x Eachine Wizard Replacement 20Amp ESC - Speed Controller BL_Heli-s (144 builds)


iPower Motor 4pcs the Force iF1407 4100kV Brushless Motor Support 3-4S for FPV (2 builds)


Gemfan Flash 3052 Tri-Blade 3" Prop 4 Pack - Choose Your Color (83 builds)

FPV Camera

RunCam Split HD / FPV Camera (17 builds)

FPV Transmitter

Lumenier TX5GS 25-200-500mW 5.8GHz FPV Transmitter w/ BFCMS Control (MMCX) (28 builds)


TrueRC AXII MMCX FPV Antenna 5.8ghz - RHCP and LHCP (7 builds)


Flysky X6B 2.4G 6CH i-BUS PPM PWM Receiver for AFHDS i10 i6s i6 i6x i4x Transmitter (180 builds)


PULSE 650mAh 4S 14.8V 75C - LiPo Battery (3 builds)


PULSE 450 mAh 4S 14.8V 45C (XT30) FPV Racing 130 Sized LiPo Battery by Pulse


Eachine EV100 720*540 5.8G 72CH FPV Goggles With Dual Antennas Fan 7.4V 1000mAh Battery For RC Drone (26 builds)

Misc Parts

4pcs XT30 Plug Male Female Connector with 150mm 16AWG Silicone Wire for RC LiPo Battery FPV Drone

Misc Parts

iFlight Motor Spacer Shock Absorber Pads Damping Washer Silicone Material for Emax RS1306 iPower Motor iF1407 Brushless Motor

Misc Parts

Charpu Tape

Misc Parts

Panasonic 1000uF 35V (FC-Series) Low-ESR Capacitor for ESC Noise Reduction (120 builds)
Show stores (8)


Sign in to comment

UptiltFPV   Feb 12, 2019  

If you ever need to replace your VTX check out the speedy-bee tx-500. Its matek OEM and RF tests show it puts out dead on the money mw values. Its also $15 with an mmcx to sma and an mmcx pigtail antenna. Mounts on a 20x20 stack... I ended up putting them in all my micros and honestly I cant beleive how they perform for the price

zackpyle   Jun 02, 2018  

How did you mount your runcam split? It is too narrow for the frame but it also seems like the brackets that came with it then make it too wide...

Burghamer   Jun 02, 2018 

I used the metal bracket as a spacer and got some longer screws.  It's tight but that just means it doesn't slip.

zackpyle   Jun 02, 2018 

Ok thanks!

zackpyle   Jun 02, 2018 

You were right. The bracket used as a spacer is perfect. Not a mm to spare though

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more