This FPV Racing frame has 5mm arms, 2mm sandwich plate and 3mm top plate to take on some of the hardest gates and crashes while racing. The frame weight comes in approx. 67g (dry weight). The configuration for the SMA antenna is positioned specifically for durability. The mounting position for the SMA is tucked behind the stack on the mid-plate and is 100% protected from crashes. This give you the ability to run a Long or Stub Antenna’s without compromising the SMA connection.
Photos
Part List
Frame |
X-Caliber 5
(3 builds)
Oashobby.com
|
$35.49 |
Flight Controller |
Lumenier SKITZO Flight Controller Powered by FlightOne
(20 builds)
Getfpv.com
|
$39.99 |
ESCs |
4 x Spedix IS30 2-4s Lipo DSHOT_600 BLHeli_S 30a ESC
(4 builds)
Oashobby.com
|
$47.80 |
Motors |
4 x Brother Hobby Returner R5 2207 2500KV - Naked Bottoms
(2 builds)
Oashobby.com
|
$75.96 |
FPV Camera |
RunCam Micro Swift 2.1 Lens
(3 builds)
Oashobby.com
|
$29.95 |
FPV Transmitter |
TBS UNIFY PRO 5G8 V3 (SMA)
(3 builds)
Oashobby.com
|
$39.95 |
Antenna |
TrueRC AXII-U.FL 5.8 RHCP
(3 builds)
Oashobby.com
|
$19.99 |
Receiver |
FRSKY R-XSR - S-BUS MICRO RECEIVER
(9 builds)
Oashobby.com
|
$17.39 |
Power Distribution |
MATEK FCHUB-6S PDB - 184A CURRENT SENSOR, 5V & 10V BEC
(3 builds)
Oashobby.com
|
$9.56 |
Misc Parts |
3D Printed SMA/AXII & RX Mount - Black
(2 builds)
Oashobby.com
|
$8.00 |
Misc Parts |
3D Printed X-Caliber Soft Mount/Motor Guard Combo
(4 builds)
Oashobby.com
|
$10.00 |
There's something wrong with the motors: In the list, there are Cobras, on the pictures I spot some Brother Hobby Returner R5s(?)... :-)
Thanks for pointing that out i fixed it