This is the CRICKET 225 LONG on Armattan Productions that was designed by WickedWingman. So far this frame is awesome. 3d parts were designed by me. It is finally finished and I am very happy with it.
Photos
Part List
Frame |
Cricket 225L Stretched X 5in
Armattanproductions.com
|
$39.08 |
Flight Controller |
OpenPilot CC3D Revolution ACRO V2
(17 builds)
Readytoflyquads.com
|
$18.00 |
ESCs |
4 x Cicadas BLHeli S 20amp ESC (BB2 Version) (Out of Stock)
Armattanquads.com
|
$44.00 |
Motors |
4 x BrotherHobby Tornado T1 2205 2300kv Brushless Motor
(10 builds)
Getfpv.com
|
$79.96 |
FPV Camera |
Mini 600tvl Sony Super HAD CCD FPV Camera
Multirotormania.com
|
$38.00 |
FPV Transmitter |
Angry Beez FX799T 200mw 40 CH Video Transmitter
(37 builds)
Fpvheadquarters.com
|
$34.99 |
Antenna |
FOXEER 5.8G Circular Polarized Omni...
(2 builds)
Hifpv.com
|
$9.99 |
Receiver |
FrSKY Naked X4R-SB Receiver
(19 builds)
Rotorgeeks.com
|
$38.33 |
Power Distribution |
RROSD Pro Mini PDB
(11 builds)
Rotorgeeks.com
|
$28.99 |
any idea for frame weight without the 3D printed parts? just standoffs/bolts?
Not yet, there was a mistake when the frame was cut and the Top plate and CAM plates that showed up were 1mm instead of 1.5mm, they are sending me new ones. Right now its about 85g with he thinner plates including stand offs and screws, I also used CA glue on the edges that might have added a gram or two. I will post the weight of the frame with and without the TPU and then final weight once built. I would expect the weight to be under 90g with hardware.
Nice :)
http://www.banggood.com/Tornado-T1-2205-23002600KV-Racing-Edition-CW-Brushless-Motor-For-FPV-Multicopter-p-1075895.html
You can spare an extra motor with BG's price
This frame is now available. Sick introductory price too.
http://armattanproductions.com/pages/kit_detail/394
Pulled temporarily to verify a dimension
back up.