Rasvelg 3 Inch

By SFPV on Nov 28, 2016

8  1,862  3

Full build tutorial -


Frame dipped by www.sfpvdesigns.com

Photos

Discussion

Sign in to comment

ChristianProgrammer   Jan 05, 2017  

SFPV please advise I already have the motors and frame for this Räsvelg 3" build you dumped the $100 SIRIN FC with onboard VTX for what MRM FC and
then what did you do for VTX please ?

moteasa   Nov 29, 2016  

Looks good. How flexible is that 3D printed part? Curious if hitting a gate would just push the cam back into the FC.
You may want an o-ring on top of the FC between the FC and the nylon nut. Technically you'll still get vibes through the bolt/nut to FC. Not really isolated as it is.

SFPV   Nov 30, 2016 

I haven't had any vibration issues since I put an MRM flight controller on. The canopy is nylon so it's very strong and has little flex 👍🏼

Guides & Reviews

39 4,011  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,808  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more