Batman's Daily Driver: Lumenier QAV-R 2 Slam

By M490fpv on May 18, 2019

24  1,209  5

My QAV-R 2 Slam build.
This frame feels like a tank!
Wanted to give this frame a unique look. I just don't like to build with stock parts...
So designed a camera mount, standoff protectors, Cap and VTX holders, AXII/Immortal-T mount and special wire protectors to arms.

Wire protector files: https://www.thingiverse.com/thing:3638244
All other parts (Except GoPro mount which I canot share): https://www.thingiverse.com/thing:3638256

Overall this was very nice project. I spent quite lot of time during the design phase, but I thik it paid off :smile:

Photos

Part List

Frame

Lumenier QAV-R 2 Slam Freestyle Quadcopter Frame
Drone-fpv-racer.com
$94.60

Flight Controller

Aikon F4 2020 Flight Controller (3 builds)
Quadcoptersenzo.nl
$31.00

ESCs

Aikon AK32PIN 4-in-1 35A 6S 20x20 (55 builds)
Pyrodrone.com
$59.00

Motors

4 x BrotherHobby Returner R6 POPO 2207 1750kv (2 builds)
Drone-fpv-racer.com
$113.20

FPV Camera

Ratel (24 builds)
Caddxfpv.com
$36.99

FPV Transmitter

T-Motor FT200 Racing VTX - MMCX (8 builds)
Drone-fpv-racer.com
$30.66

Antenna

Lumenier AXII Stubby 5.8GHz Antenna (RHCP) (232 builds)
Getfpv.com
$14.99

Receiver

FrSky R9 Mini 900MHz Long Range Receiver (53 builds)
Getfpv.com
$19.99

Batteries

Tattu R-Line Version 3.0 1300mAh 22.2V 120C 6S1P Lipo Battery Pack with XT60 Plug (50 builds)
Pyrodrone.com
$36.99
Show stores (5)

Discussion

Sign in to comment

Jodie Froster   Jun 16, 2019  
1

I'm building this frame, any chance I can get that session mount .stl?

baze_fpv   May 19, 2019  
1

Really nice locking mechanism on the arm quards :+1: .

Currently   May 19, 2019  
1

Those 3D printed arm gaurds look beast!

eduenlamer   May 19, 2019  
1

Does she fly as good as she looks?

M490fpv   May 19, 2019 

Only short maiden yet, but she seems to fly really nice! The t-motor vtx has internal lc filter, so video is very good also 😊

Guides & Reviews

52 3,924  44
25 days ago

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
35 2,608  18
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more