Black/Red Floss 3 hybrid racer

By M490fpv on Jul 26, 2019

10  340  2

Another Floss 3.0 build.
This one is a special build to fellow fpv pilot.
Floss 3 hybrid frame and 2206.5 1722kv motors should give a good ride :)


Part List


Hyperlite Floss 3.0 Race Frame "HYBRID" (7 builds)

Flight Controller

AIKON F4 Mini 20x20 Flight Controller with OSD (15 builds)


Aikon AK32PIN 32Bit 35A 2-6S 20x20 4in1 ESC (55 builds)


4 x Hyperlite 2206.5-1722KV TEAM EDITION (3 builds)


Gemfan Flash Durable 5149-3 CHOOSE COLOR (18 builds)

FPV Camera

Runcam Micro Eagle (306 builds)

FPV Transmitter

TBS Unify Pro 5G8 HV - Race 2 (MMCX) (11 builds)


Lumenier AXII MMCX 5.8GHz Antenna (RHCP) (70 builds)


FrSky R-XSR 2.4GHz 16CH ACCST Micro Receiver (875 builds)


TATTU R-Line 1050mAh 6s 95C Lipo Battery (46 builds)
Show stores (6)


Sign in to comment

collider85   Apr 14, 2020  

Do you happen to have a link to the files for that vtx holder?

Guides & Reviews

59 4,800  49
Aug 26, 2020

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
36 2,690  19
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more