Race Rig

By FissionBomb on Nov 10, 2019

8  137  1

Building a cheap frame for the purpose of bashing through gates. All go, no show.

I am going with the Mamba 30x30 stack and Eagle Pro cam. AKK Race VTX. The Mamba does not fit in a normal front-back orientation so in have to rotate the FC and ESC 90 degrees.

I used a Runcam Eagle and the metal bracket it came with. The carbon camera plates of the frame did not fit in any orientation.

This thing flies amazingly well. it has almost no propwash on stock 3.5.7 PIDs.

Photos

Discussion

Sign in to comment

kwadkenstine   Nov 10, 2019  
1

Ive got a couple of these frsmes. Didnt build it out like yours tho . Good work. I had issues with the camera mount too,
Called mine Drop bear

Guides & Reviews

27 2,024  27
22 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,803  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more