Built this beautiful racer to celebrate the 5K followers on my Instagram channel (M490fpv). It will be a giveaway quad right after i hit 5K.
Designed few parts to have an unique look. Arm protectors, micro axii mount and motor wire guards.
These parts are available on thingiverse: https://www.thingiverse.com/thing:4441447
Came out really awesome with neon yellow tpu prints! :)
Photos
Part List
Frame |
SlamNasty 3" Race Frame
Catalystmachineworks.com
|
$39.99 |
Flight Controller |
HGLRC XJB F440 Omnibus F4 Flight Control 40A Blheli_32 3-4S esc
Hglrc.com
|
$49.99 |
Motors |
4 x BrotherHobby Tornado 1407- 3600kv
(2 builds)
Drone-fpv-racer.com
|
$59.60 |
Propellers |
GEMFAN 3052 - Tripales - Polycarbonate - 4pcs
(2 builds)
Drone-fpv-racer.com
|
$2.90 |
FPV Camera |
Caddx caméra FPV Ratel 1200 TVL
(2 builds)
Drone-fpv-racer.com
|
$37.90 |
FPV Transmitter |
TBS Unify Pro32 Nano 5G8 V1.1
(9 builds)
Drone-fpv-racer.com
|
$31.90 |
Antenna |
Lumenier Micro AXII U.FL 5.8GHz 1.6dBi Gain FPV Antenna RHCP / LHCP For RC Drone
(5 builds)
Banggood.com
|
$21.95 |
Receiver |
Récepteur FrSky R-XSR (SBUS/PPM 16/8 voies) (INT-FCC)
(2 builds)
Drone-fpv-racer.com
|
$22.90 |
Batteries |
Batterie Lipo Tattu R-Line 4S 850mAh 95C (XT60)
Drone-fpv-racer.com
|
$20.99 |
It looks like you've soldered your capacitor to a different part of the esc. usually I see them attached to the same solder joint as the battery leads where they connect to the esc + and -. is that a special feature of the esc you've used?
Do you have a dry weight of this build?
166g with props and strap, without lipo