after several fc malfunction when building babytooth i decide to build a TP3. initially i wanted a crux35 for the the long flight time, so i buy the happymodel 1404 motors. i bought some secondhand 2s and 3s battery so i decide on the 4800kv size. when i received the motor i tried it with the aio 1-2s board but nothing happen. just to test it. after whatching angry don's video comparing 1204 vs 1404 motor i decide to get the happymodel F411 20a fc, to get more amp overhead. plus its price 195myr compare to crazybee pro v3.1 12a which was 179myr.

the good of the HM f411 is that it also include diversity rx. so less worries to adding rx. i will add elrs if the range not enough. now the build in rx is good enaugh in my flying area. much more than spi frsky or spi flysky i had used before.

i did have 2 fonster apro 3mm 3inch to use and some 3inch gemfan blade.
initially i flew with akk x5 vtx n angry don canopy, flew great until i crash n broke the vtx. now i will change it with zeus nano vtx

i edited the kabab battery holding because im using 450mah 3s rush battery. added a little tape on 600mah 3s gnb as its smaller in size.

details:
Fonster Apro 3mm frame
Happymodel crazyf411 with d8 rx
zeus nano vtx with linear antenna
caddx ant 4:3
angry don canopy
Happymodel 1404 4500kv
Gemfan 3016 biblade

latest:
i upgraded to angry don canopy so that ita easier to mount the zeus nano vtx and the electronic get more protection.

update:
the zeus nano vtx 25mm holder broke n i retry using HM ovx303, im surprise it suddenly worked. also change the canopy with edited picklepod camera mount because i dont like the low profile of angry don mount. add a cap just for fun. its almost a HAPPYMODEL TP3 by now, fc+vtx+motor LOL