Frame: BETAFPV TWIGLET FPV Drone 2,5"
FC: JHEMCU GHF411AIO-BMI 40A F411 Flight Controller BLHELIS 40A 4in1 ESC 2-6S
Canopy:
new: ShenStar - 3D Printed Material TPU Camera Mount with 25.5x25.5mm
old: BETAFPV Micro Canopy Lite
old: Home/Hand made from Aloy!
VTX: Happymodel Upgraded VTX 5.8G 40CH 25mW~200mW
Propeller: Gemfan 2 Blades PC Propeller 65mm
Motor: DroneART 2-3S 1103/7500KV
Camera:
new: RunCam Nano 2
old: Caddx ANT
Receiver:
Until 2023 Xm+
From 2023 ELRS
Weight: 59g
Battery:
GNB 2S 450mah (29g)
GNB HV 2S 380mah (23g)
GNB HV 2S 660mah (34g)
GNB HV 2S 720mah (36g)
URUAV HV 3S 300mah (26g)
GNB HV 3S 380mah (31g)
Summ weight: around 80-90g
Fly time: 5minutes
Photos
are those motor any good?
thanks
I have 2 other drones with this type of motors 1306 / 3100KV! with 4S can be OK not extremly powerful but long fly time! and good manuveable not gives penalty if did small mistake like with powerful motors over power and over speed!
This type motors are more then 5years old design realy "old school" :) but sometimes it has very low price chipest than brushed! :)
https://rotorbuilds.com/build/27278
https://rotorbuilds.com/build/27762
thanks thanks...might buy some and try one day
are the motor wire silicone?
NO..... the cable is "rubbish" but sometimes possible to buy it low price 2-3 euro/p!