Zmr180 chopped top had bad luck with some little bees and burnt this quad down cause of it.
Frame |
ZMR180 V2 180mm Carbon Fiber Mini FPV Quadcopter Frame Kit with PCB Board
Fpvmodel.com
|
$19.24 |
Flight Controller |
SP Racing F3 Flight Controller (Acro)
(8 builds)
Rcdepothobbies.com
|
$29.99 |
ESCs |
4 x Favourite FVT LittleBee 20A OPTO PRO ESC BLHeli 2-4S F396 Supports OneShot125 for RC Drone FPV Racing
(20 builds)
Banggood.com
|
$44.76 |
Motors |
Lumenier RX1806-13 2500kv Motor
(2 builds)
Getfpv.com
|
$14.99 |
FPV Camera |
Banggood
(130 builds)
Banggood.com
|
$15.45 |
FPV Transmitter |
RMRC Cricket Pro - 5.8GHz VTX w/ Race Band w/ SMA Connection
Readymaderc.com
|
$59.99 |
Antenna |
Omnivision Antennas 5.8GHZ 3 Lobe Stubby Antenna LHCP - Orange
(4 builds)
Heli-nation.com
|
$15.99 |
Receiver |
FrSky XSR 2.4GHz 16CH ACCST Receiver w/ S-Bus & CPPM
(480 builds)
Getfpv.com
|
See Site |
Power Distribution |
Matek Systems PDB-XT60 W/ BEC 5V & 12V 2oz Copper for RC Drone FPV Racing Multi Rotor
(139 builds)
Banggood.com
|
$4.69 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
how do you do the lowrider mount for the frames?
I just cut the top plate in half after the 2nd set of standoff holes and used 10mm stand offs on the back sets of holes with a set of smaller standoffs on the electrinics stack for support
noice. im trying to think of a qav r lowrider mod