HYPERLOW VERT RACER 10mm Build

By richrd on Nov 03, 2017

24  1,501  3

Here's a rough build guide to the Hyperlow Vert Racer frame using an AIO board for a 10mm build height.

This frame is designed for racing with its mid-mount battery placement for optimal CoG, and a vertical arm design (developed by Bob Roogi) with cleaner thrust and less resistance.

3d printed or carbon cut spacers can be used to bump up the build height to 15mm for a double stack. Stay tuned for that build!

Join in the discussion at the Hyperlow FB page: https://www.facebook.com/groups/784532865043719/

Frame available at http://hyperlowframes.com/

Photos

Part List

Frame

Vert Racer (3 builds)
Hyperlowframes.com
$65.00

Flight Controller

DYS F4 Pro V2 Flight Controller (22 builds)
Rccrazed.com
$38.20

ESCs

4 x Spedix 25a ESC DShot 600 BLHeli_S (20 builds)
Racedayquads.com
$39.96

Motors

Hyperlite 2306-2522KV Team Edition (7 builds)
Pirofliprc.com
$25.99

FPV Camera

RunCam Micro Swift 2 Orange 2.1 Lens (49 builds)
Pirofliprc.com
$26.99

FPV Transmitter

TBS UNIFY PRO 5G8 HV(SMA) (472 builds)
Pirofliprc.com
$49.95

Antenna

EMAX PAGODA II ANTENNA BY MAARTEN BAERT (44 builds)
Pirofliprc.com
$14.99

Receiver

XM PLUS (Mini SBUS Non-telemetry Full Range) (923 builds)
Pirofliprc.com
$12.99
Show stores (4)

Discussion

Sign in to comment

delta_fpv   Nov 04, 2017  
2

thats tight

RocketSquidFPV   Nov 15, 2017 
1

mmmmmmmm ye

thumbtwiddler   Nov 06, 2017  
1

I n e e d t h i s

Guides & Reviews

44 4,560  30
Jan 15, 2019

The iFlight XL5 V3 is a fantastic freestyle frame for the price. It features chamfered edges on some very nice quality carbon fiber. My goal for this build was to use high quality components at a relatively low price. Not only that, but I managed to reduce the number of solder points to the bare minimum. I've never built such a plug-in-play quad! The flight controller has an integrated VTX and doesn't..

Read more
14 2,782 
Nov 16, 2018

Update! Happymodel has released a new V2 Frame which uses a more durable plastic. The Happymodel Mobula7 is one of those rare treats to hit the micro scene. Countless models hit the market every month, but this one just happens to check all the boxes. It's a 2S brushless micro with a 75mm motor stance. It's slightly larger than the more traditional 65mm brushed micros, but it's still quite small...

Read more