This is my second-ever build. I saw this frame and got the itch to build a micro. I'm already on my 2nd set of motors (the first choice were horribly under-powered and couldn't handle 4S). This model handles really well and is fast!
Frame |
GEPRC GEP HX2 Hummingbird 110mm Micro FPV Racing X Frame RC Drone Carbon Fiber Supports Runcam Micro Swift
(8 builds)
Banggood.com
|
$17.98 |
Flight Controller |
Flytower Plus Mini F4 Flight Controller - $49.42 |GearBest.com
Gearbest.com
|
$49.42 |
Motors |
4 x EMAX RS1106 II 4500Kv Micro Motor
(32 builds)
Racedayquads.com
|
$51.96 |
Propellers |
2 Pairs Gemfan 2035 2X3.5X4 4 Blade 1.5mm Mounting Hole CW CCW FPV Racing Propeller for RC Drone
(31 builds)
Banggood.com
|
$3.92 |
FPV Camera |
RunCam Micro Swift 600TVL FPV Camera 2.1mm Lens DC 5-36V FOV 160 Degree CCD NTSC IR Blocked for Racing Drone Quadcopter (Orange)
Amazon.com
|
$29.99 |
FPV Transmitter |
Eachine VTX03 Super Mini 5.8G 72CH 0/25mW/50mw/200mW Switchable FPV Transmitter
(417 builds)
Banggood.com
|
$12.22 |
Receiver |
FrSky XM Plus Mini Receiver up to 16CH 1.6g Full Range fit for Micro Drone XM
(28 builds)
Amazon.com
|
$18.00 |
Batteries |
TATTU 14.8V 450mAh 75C 4S LiPo Battery Pack with XT30 Plug for Multirotor FPV 150 Size
(20 builds)
Amazon.com
|
$14.58 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Hi, I m building a 2" with same motors and same esc and same frame.
I get a lot of vibrations with 2030x3 props...I had to use electrical tape under motor to reduce them. And I changed props with 2040x4. But motors are still really warm after few seconds of hovering.
You had theese problems?
I have a bnf GEPRC Hummingbird that I bought from Banggood and the motors run very hot. If you find the problem, let us know.
Thanks.
Solved... Turnned on DYNAMIC_FILTER and no more hot motors. :)