New Martian, old components

By ricardovasc on Feb 19, 2018

2  249  0

In this build I used a new Martian II anniversary special edition with some components from another quad I used to fly in the beginning of 2017 (Lisam LS210).

The intention is have a functional quad that I can practice freestyle without concern too much about a lot of money involved to build the aircraft.

New componentes:

  • Frame Martian anniversary special edition
  • RX FrSky XM+
  • Motor protetors
  • Matek LED and buzzer
  • Amass XT60
  • Suleve Standoffs

All others components are old and even the set of props I took the picture already flew one pack.
I just didn't like where the FPV antenna is, but with de pigtail on the VTX I really need to think the best option.

This frame is good and well cut, but I needed to sand it to get a better finish. The arms don't look be very firm even with the 3 screws, but may be is just may impression.

I hope you enjoy the build.


Part List


Anniversary Special Edition Martian 215 215mm Carbon Fiber RC Drone FPV Racing Frame Kit 136g (52 builds)

Flight Controller

OMNIBUS Betaflight F3 AIO V1.1 Flight Controller with Integrated OSD Barometer Support SD Card (59 builds)


Racerstar RS20Ax4 20A 4 in 1 Blheli_S Opto ESC 2-4S Support Dshot150 Dshot300 for RC FPV Racing Drone (66 builds)


4X Racerstar Racing Edition 2205S BR2205S 2300KV 2-4S Brushless Motor For X210 220 QAV250 RC Drone FPV Racing (23 builds)


GEPRC 5040 V2 5 Inch 3 Blade Propeller Triblade Props Colver Prop Blue Yellow Pink For FPV Racer (19 builds)

FPV Camera

FOXEER Arrow V3 2.5mm 600TVL 4:3 HAD II CCD PAL/NTSC IR Block Mini FPV Camera Built-in OSD MIC (131 builds)

FPV Transmitter

DYS MI200MW Pigtail VTX25mW/200mW Switchable 5.8G 40CH AV FPV Transmitter SMA For FPV RC Drone (11 builds)


DYS FPV 5.8G Antenna 4dBi Mushroom Antenna RHCP TX RX SMA RP-SMA Male for RC Drone FPV Racing (32 builds)


Frsky XM+ Micro D16 SBUS Full Range Mini Receiver Up to 16CH for RC FPV Racing Drone (1295 builds)


Tattu LiPo Battery Pack 1550mAh 75C 4S 14.8V with XT60 Plug for RC Boat Heli Airplane UAV Drone FPV (42 builds)


Tattu LiPo Battery Pack 1550mAh 75C 4S 14.8V with XT60 Plug for RC Boat Heli Airplane UAV Drone FPV (42 builds)

Power Distribution

Matek Systems PDB-XT60 W/ BEC 5V & 12V 2oz Copper for RC Drone FPV Racing Multi Rotor (139 builds)

Misc Parts

5 Pair Amass XT60+ Plug Connector With Sheath Housing Male & Female (2 builds)

Misc Parts

Matek WS2812B LED Board With 5V Buzzer For Naze 32 Skyline 32 Flight Controller for RC Drone FPV Racing (7 builds)

Misc Parts

KINGKONG/LDARC Universal Motor Cover Protection for 22 Series Motors M3*8 for RC Drone FPV Racing (8 builds)

Misc Parts

5 PCS Eachine Battery Tie Down Strap 22.3cm (10 builds)

Misc Parts

Suleve™ M3AS8 10Pcs M3x35mm Knurled Standoff Bolt Nut Aluminum Alloy 6061 Multicolours (11 builds)
See Site
Show stores (2)


Sign in to comment

Guides & Reviews

21 4,205  20
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more
3 3,798  12
Sep 18, 2019

When the FatShark HDOs hit the market in 2018 the FPV community rejoiced for the new Sony OLED displays. While they lacked further upgrades like an updated DVR and power button they were still a market success. With the 2019 announcement of the Orqa FPV.One the community finally had a potential HDO killer on the horizon. With only weeks before the release of the Orqa FPV.One Skyzone came out of left..

Read more