CB2.5

By jj55 on Mar 19, 2018

14 5 3

Super nimble! Extremely fun for proximity. UPDATE: I swapped the BBB's with Emax 1106 6000kv.

Photos

Part List

Frame	Maintenance Mode (3 builds) Rotoriousfpv.com	See Site
Flight Controller	Emax F3 Magnum Mini Tower System Rotorgeeks.com	$62.09
Motors	4 x EMAX RS1106 II 6000Kv Micro Motor (35 builds) Racedayquads.com	$51.96
Propellers	Gemfan Flash 2540 Tri-Blade 2.5" Prop 8 Pack - Choose Your Color (172 builds) Racedayquads.com	$3.69
FPV Camera	RunCam Micro Swift 2 Orange 2.1 Lens (49 builds) Pirofliprc.com	$26.99
FPV Transmitter	Eachine VTX03 Super Mini 5.8G 72CH 0/25mW/50mw/200mW Switchable FPV Transmitter (417 builds) Banggood.com	$12.22
Receiver	Frsky XM+ Micro D16 SBUS Full Range Mini Receiver Up to 16CH for RC FPV Racing Drone Banggood.com	$13.69
Batteries	Tattu 450mAh 11.1V 75C 3S1P Lipo Battery Pack with XT30 plug (20 builds) Flexrc.com	$11.86
Misc Parts	FOREVER TUBES (TUBES AND CAPS ONLY) (13 builds) Pirofliprc.com	$3.00
Misc Parts	AirBlade Battery Strap for Nano Quads with Metal Buckle (4 builds) Airbladeuav.com	$1.50
Misc Parts	AirBlade Battery Strap for Nano Quads with Metal Buckle (4 builds) Airbladeuav.com	$1.50
Misc Parts	1Pair XT30 2mm Golden Male Female Non-slip Plug Interface Connector (8 builds) Banggood.com	$1.45

Show stores (7)

Like Copy Part List Follow jj55

Discussion

Ant F.P.V Apr 09, 2018

How are the tattu 450mah packs, how much flight time do you get eith them?

jj55 Apr 16, 2018

about 2.5 min

rhino45 Apr 02, 2018

how is your flight time with those motors? Im assuming you are running the 6000Kv with the 3s

jj55 Apr 16, 2018

about 3 minutes with the BBB. Now about 2 and a half min. with the 1106's.

7uvoK Mar 19, 2018

Very nice build! I'm looking at the CB3 frame for my next build. Any thoughts on space constraints? Do you think you could fit the Runcam Split Mini?

Would love to see more photos1

jj55 Mar 19, 2018

You would probably have to increase the height of the top plate. It’s a bit tight, but If you have build experience it’s not that hard! I’ll upload more photos soon. Thanks