iFlight iX2 V2 _ Split HD, TBS XF Nano

By Buzzin G FPV on Nov 20, 2018

8  1,011  0


Introducing my iFlight iX2 V2 mirco HD with crossfire onboard
This is my first micro build since the RotorX Atom, the micro tech has really come in in 2 years.
My criteral was micro for hitting small gaps and HD capable, the more I researched the more I realised I wasn't going to get something this size to carry a GoPro Session the way I wanted so compromised for the Split Mini V2, the video quality has been far better than expected on my first flight (indoor maiden). Keep an eye on my YouTube channel for footage https://www.youtube.com/BuzzinGFPV
Full Spec:
iFlight iX2 V2 2.5
Motors: T-Motor F15
FC: Omnibus F4 Nano V6
ESC: ORI32
Cam: Runcam Split Mini V2
Prop: Gemfan 2540
Lipo: Tattu 3s 450mah
VTX: Unify Pro HV Race
Antenna: AXii
Rx: Crossfire Nano + Race Antenna

Photos

Part List

Frame

Iflight Racer iX2 Lite V3 - 2.5" (6 builds)
Drone-fpv-racer.com
$21.03

Flight Controller

Airbot Omnibus F4 Nano Flight Controller (56 builds)
Hobbyrc.co.uk
$29.59

ESCs

Airbot Ori32 25A 4in1 BlHeli_32 ESC (82 builds)
Hobbyrc.co.uk
$46.13

Motors

4 x T Motor F15 1106 6000KV Brushless Motor
Makeitbuildit.co.uk
See Site

Propellers

Gemfan Flash 2540 Tri-Blade Propellers
Makeitbuildit.co.uk
See Site

FPV Camera

Runcam Split Mini 2 HD FPV Camera (86 builds)
Hobbyrc.co.uk
$74.84

FPV Transmitter

TBS Unify Pro Race VTX HV 5.8GHz (SMA) (544 builds)
Hobbyrc.co.uk
$29.84

Antenna

Lumenier AXII 5.8GHz Antenna (RHCP) (U.FL) (3 builds)
Hobbyrc.co.uk
$16.17

Receiver

TBS Crossfire Nano Receiver (652 builds)
Hobbyrc.co.uk
$32.33

Batteries

Batterie Lipo Tattu 3S 450mah 75C (XT30)
Drone-fpv-racer.com
$13.48

Misc Parts

TBS Crossfire XF Race Antenna 868MHZ (3 builds)
Hobbyrc.co.uk
$7.37
Show stores (3)

Discussion

Sign in to comment

Guides & Reviews

39 3,807  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,663  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more