Basher
Photos
Part List
Frame |
Marmotte
(91 builds)
Armattanquads.com
|
$114.00 |
Flight Controller |
HyperLite F4 OSD V2 with VTX PIT mode
(10 builds)
Pyrodrone.com
|
$32.99 |
ESCs |
PYRO32F3-45Amp 4in1 F3 32bit BLHELI ESC 4x45A
(10 builds)
Pyrodrone.com
|
$49.99 |
Motors |
4 x MQTB - Cobra 2207 2100kv (Race Edition)
Miniquadtestbench.com
|
See Site |
Propellers |
Gemfan 5552-3 Black
(2 builds)
Multicopterbuilders.com
|
$2.99 |
FPV Camera |
Foxeer Predator Standard/Mini V3 16:9/4:3 PAL/NTSC switchable 1000TVL Super WDR OSD 1.8mm Lens - Red, Black, Blue, and Purple
(24 builds)
Rotorriot.com
|
$41.99 |
FPV Transmitter |
TBS Unify Pro 5G8 HV (SMA)
(596 builds)
Team-blacksheep.com
|
$49.95 |
Antenna |
Antenne Lumenier Micro AXII SMA 5.8GHz -RHCP
Drone-fpv-racer.com
|
$18.62 |
Receiver |
TBS Crossfire Nano Rx - FPV LONG RANGE DRONE RECEIVER
(1505 builds)
Team-blacksheep.com
|
$24.95 |
Batteries |
Tattu 1800mAh 18.5V 75C 5S Lipo
(3 builds)
Dronelec.com
|
$32.90 |
3D Printed |
Armattan Marmotte & Badger Session Mounts
(3 builds)
Brain3d.co
|
$15.00 |
How does it look/fit with the 1800mAh Lipo and GoPro? I am wondering if the 1800mAh is too big for this frame
little bit too big from my point of view and very heavy if you are in 6s. 5s is ok
Yeah I saw you had the 1800 listed as your battery. I am thinking of making a similar build. What flight times are you getting?
I did a new build with 6s 1300mah for freestyle.
Yep. I have a 6" Chamelon Ti and use the 6S 1300mah for freestyle and a 5S 1800 for mid-range