That‘s a remix of some old parts I had lying around.

It’s a 90mm frame, so up to 2035 props.
It’s a very tight build... and the foxeer fit just so. I used 20mm standoffs to make it easier. The USB port is in the back and that’s a pain...

It’s not possible to have an adjustable angle. If you use some other mount than the one here, then the tip of the props will hit the screws holding the camera :)

I wanted to top mount the lipo. However when doing so the VTX antena needs to go out from the back, making it dangerously close to the props... Having the lipo under is much easier. Battery strap is 10cm long...

The weight without battery is about 80gr.

flight times are 3-4min. 3S is better :)