I've converted my analog emax hawk 5 to digital hawk 6:)
Frame |
EMAX Hawk 5 FPV Drone Kit
(2 builds)
Store.flitetest.com
|
$44.99 |
Flight Controller |
Lumenier LUX F7 Ultimate Flight Controller (Dual Gyros)
(33 builds)
Getfpv.com
|
$79.99 |
ESCs |
Holybro Tekko32 35A 4-in-1 BLHeli32 3-6s ESC
(105 builds)
Getfpv.com
|
$56.99 |
Motors |
4 x TMotor F40 PRO II - 2400KV
(24 builds)
Getfpv.com
|
$99.60 |
Propellers |
Azure Power 6145 BSP - Big Smooth Props (Set of 4 - Greenery)
Getfpv.com
|
$3.49 |
FPV Camera |
Caddx DJI Digital HD FPV Air Unit Kit
(293 builds)
Getfpv.com
|
See Site |
Receiver |
TBS Crossfire Nano Rx FPV Long Range Drone Receiver
(1500 builds)
Pyrodrone.com
|
$29.95 |
Batteries |
Lumenier N2O 1500mAh 4s 120c Lipo Battery
(2 builds)
Getfpv.com
|
$35.99 |
Misc Parts |
Smallest Mini Dual GLONASS+GPS BN-180 Micro Double GPS Antenna Module UART TTL For CC3D F3 RC Drone Airplane
(35 builds)
Banggood.com
|
$11.32 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Very nice! I'm looking to update my Hawk 5 to Dji digital. Do you think I'd be able to fit a vista unit along with the original stack in there (minus the vtx of course).
of course!
Awesome! Did you use longer standoffs to give a bit more space? Is your camera holder a custom 3d model print?
i changed the camera mount to a 3d printed one but the height is the same