Been having fun printing a few different frames lately and really like the design of this one so decided to build it up. Still need put some shrink wrap on the arms for the motor wires, but other than that she's ready for her maiden flight.
Update 12/21/20
Replaced the 3D printed canopy with a NewBeeDrone Goober canopy resulting in a weight loss of a gram and a half.
Photos
Part List
Frame |
Makes of 95mm Xmicro racer / 100mm Xmicro racer by OptimaZe - Thingiverse
Thingiverse.com
|
See Site |
Flight Controller |
HappyModel CrazyBee F4 Pro V3 AIO Whoop Flight Controller for Larva, Sailfly, Mobula - FRSKY
(32 builds)
Racedayquads.com
|
$47.99 |
Motors |
4pcs 0802 16000KV Brushless Motors 1-2S SE0802 Micro Drone Motor for Micro FPV Racing Drone Like Mobula7 Snapper7 RC Drone
(3 builds)
Amazon.com
|
$1.00 |
Propellers |
Gemfan 65mm Micro Propellers (1mm Shaft - Set of 8)
(14 builds)
Getfpv.com
|
$2.99 |
FPV Camera |
Wolfwhoop WT05 Micro AIO 600TVL Camera Only 3.4g 5.8GHz 25mW FPV Transmitter with Dipole Brass Antenna Combo for FPV Quadcopter
(23 builds)
Amazon.com
|
$14.39 |
Batteries |
NewBeeDrone Nitro Nectar Gold 300mAh 1S HV LiPo Battery (4 Battery)
(17 builds)
Newbeedrone.com
|
$24.99 |
3D Printed |
Toothpick Nano Pod Lite [14mm] by Dave_C_FPV
(13 builds)
Thingiverse.com
|
See Site |
Misc Parts |
NewBeeDrone BeeBrain Goober Canopy - Multiple Colors
(36 builds)
Newbeedrone.com
|
$3.99 |
I try building little guys like this but it usually ends in the bin , So Hats off to you,!!!
Thank you sir! I really enjoy putting these little kwads together. Especially this time of year when I typically only fly indoors or in my backyard. I rarely fly anything bigger than a 2.5" during the winter months.