My first build that I did from scratch. and also my first KISS copter.
Amattan Marmotte frame with Fettec KISS FC and Fettec 45A 4in1 ESC.
T-Motor F40 ProiV 1950KV.
Caddx Vista.
I am using the DJI remote, so no extra receiver.
I used the standard version of the frame and not the DJI version to save some weight and have more centralized masses.
It is quite tight, but it fits.
Photos
Part List
Frame |
Marmotte
(91 builds)
Armattanquads.com
|
$114.00 |
Flight Controller |
FETTEC KISS F7 FC V1.2 20x20mm-30x30mm
(33 builds)
Pyrodrone.com
|
$71.99 |
ESCs |
FETtec 4in1 ESC 45A
(25 builds)
Fettec.net
|
$69.90 |
Motors |
T-Motor F40 Pro IV 1950Kv Motor - Choose Your Color
(5 builds)
Racedayquads.com
|
$26.89 |
Propellers |
HQ Prop ETHIX S4 5x3.7x3 Tri-Blade 5" Prop 4 pack - Lemon Lime
(60 builds)
Racedayquads.com
|
$3.49 |
FPV Camera |
Caddx Vista Digital HD System for DJI HD FPV
(98 builds)
Pyrodrone.com
|
$164.99 |
FPV Camera |
Caddx Vista HD Digital System 5.8GHz FPV Transmitter VTX FOV 150 Degree Camera 1080P Recording AIO Compatible DJI FPV Goggles Re
(211 builds)
Banggood.com
|
$163.99 |
Radio |
DJI FPV Remote Controller (Mode 2)
(61 builds)
Getfpv.com
|
$299.00 |
Goggles |
DJI Digital HD FPV Goggles
(148 builds)
Getfpv.com
|
$299.00 |
Clean build! How did you mount the vista to the rear ? Did you print any adapters?
No adapters needed. There are slots with 20mm distance in the rear, you can use these to mount it.