Basically a BetaFPV 85x DJI with a different canopy.
BetaFPV AIO, Betafpv 1103/8000Kv, naked caddx Vista and tracerRX..
Heavy pig at 50g+, but surprisingly ok on a 3S 300mAh.
Would recommend mainly for short outdoor freestyle runs when you want HD footage.
Frame |
GEPRC TinyGO Frame Kit to buy | FPV24.com
Fpv24.com
|
See Site |
Frame |
Beta85X Whoop Frame
(19 builds)
Betafpv.com
|
$1.99 |
Flight Controller |
F405 2-4S AIO Brushless Flight Controller (BLHeli_S) V3
(11 builds)
Betafpv.com
|
$42.99 |
Motors |
1103 Brushless Motors
(32 builds)
Betafpv.com
|
$39.99 |
Propellers |
6 Pairs Emax AVAN Micro 2 Zoll 4 klinge Propeller Rot Blau für 1104 4500 6500KV Motor RC Modelle Multicopter DIY Rahmen Teil Ac
(7 builds)
De.aliexpress.com
|
$7.56 |
FPV Transmitter |
Caddx Nebula Nano V2 Digital FPV Camera Kit - (Black/Silver)
(3 builds)
Getfpv.com
|
See Site |
Receiver |
TBS Tracer Nano RX
(4 builds)
Hobbyrc.co.uk
|
See Site |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Hi Sam! I'm so interested in your build, I want to build something very similar to this. Does the Tinygo Canopy fit perfectly in the beta85x frame?
Have you tried to fly it in 2s indoors?
thanks a lot man! good
Hey man!
The tinygo canopy does not relly fit perfect. the screws at the sides work, but you have to take long screws and come from the bottom of the frame (drill out with a 1mm drill or a needle) and the front part does not fit well so I had to secure it with zip tie (and foam between cam and frame).
For 2S I'd go with 11000kV motors and not 8000, but I guess it will fly reasonably well.