Fun
Frame |
Armattan Tadpole 3 inch Frame
(36 builds)
Pyrodrone.com
|
$37.50 |
Flight Controller |
Flywoo GOKU F745 2-4S 16x16 Stack/Combo (F745 FC / 13A 4in1 ESC)
Racedayquads.com
|
$94.99 |
Motors |
BETAFPV 1204 5000KV Brushless Motors (4pcs)
(9 builds)
Getfpv.com
|
$53.99 |
Propellers |
Gemfan WinDancer 3028 Tri-Blade 3" Prop 4 Pack (5mm/1.5mm Mounting) - Choose Your ColorWhisky
(8 builds)
Racedayquads.com
|
$2.69 |
FPV Camera |
Caddx Ant Nano 1200TVL CMOS PAL/NTSC FPV Camera (1.8mm) - Choose Color & Aspect RatioSilver / 16:9
(134 builds)
Racedayquads.com
|
$17.89 |
FPV Transmitter |
TBS Unify Pro32 Nano 5G8 V1.1 VTx Video Transmitter
(400 builds)
Pyrodrone.com
|
$29.95 |
Antenna |
Speedy Bee 5.8GHz Antennas V2 RHCP (2pcs)
Defiancerc.com
|
$15.99 |
Receiver |
HappyModel 2.4GHz EP1 RX ELRS Receiver
(107 builds)
Racedayquads.com
|
$13.49 |
Batteries |
3S Drone Batteries for - RaceDayQuads
(44 builds)
Racedayquads.com
|
$11.74 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Great build. I'm a big fan of Armattan and especially the 3 inch Tadpole. I've redesigned the Tadpoles for the Caddx Vista and Polar for either 12mm or 9mm motor mount patterns, with also a beefier 3mm frame. Check out if you have any interest in building one of these frames. https://rotorbuilds.com/build/28285
Sounds nice. I am invested in Shark Byte though.
I'd be interested to learn more about shark byte. I haven't tried it yet. If you have any pics you could upload, it would be cool to see how you install in your builds.
I added pics to the Shark Byte builds. The race frame has a 3d print for the TX5S.1 to convert it to 30x30.