This time (2022SEP) JHEMCU GHF411AIO BMI is newest FC! I would like to build Happy Model VTX with this FC
Have to bee careful to biuld Happy Model VTX into this FC bcus HM does not have correct vire diagram and wrong "in/out" mark on VTX! IN is yellow and OUT is blue!! NOT right! else it is oposite!! Yellow is OUT and BLUE is IN! First connect I folow vire diagram of HM and got balck screen without any camera picture and OSD! Finaly soldered yelow (in) from VTX into CAM point (in) on FC and blue (out) cable from VTX into Yelow VTX (out) into FC... NOW they are working together HM VTX + Jhemcu FC

Frame: AlfaRC Apex 95mm carbon fiber frame
FC: JHEMCU GHF411AIO-BMI 40A F411 Flight Controller BLHELIS 40A 4in1 ESC 2-6S
VTX: Happymodel Upgraded VTX 5.8G 40CH 25mW~200mW
Propeller: Gemfan Hurricane 2023
Motor: DroneART 2-3S 1103/7500KV
Camera: Caddx ANT
Receiver: XM+

Weight: 67g
Battery: URUAV HV 3S 300mah (25g)
Summ weight: around 93g
Fly time: 4minutes+

First fly (test)
https://www.youtube.com/watch?v=USd37LXXQMY&lc=UgyO1XaIPPbM2-_agSV4AaABAg