Frame: Own development and cut by ccarbon.hu (11,4g-17,3g)
FC:JHEMCU Ruibet F4AIO 1-2S F411 12A 4in1 ESC for FPV Toothpick (3,8g)
Propeller: Gemfan Hurricane 75mm 2blade (0,5g)
Motor: Happy Model 1102/9000KV (3,2g)
VTX: Eachine ATX03S 200mw
Camera: Caddx ANT (2,4g)
Receiver: ELRS (0.8g)
Weight: 54g
Battery: GNB HV 2S 380mah (22g)
Summ weight: around 76g
Fly time: 5minutes
This looks hella fun, what thickness are those plates? Bottom 3mm, and top 2mm? How is it holding up? I love how light it is!
Thnx for your comment! It is a light build thickness depends on weight of motor and battery!
Bottom is 2,5mm Top is 1,5mm bcus weight of motor is less than 5gramm and 380mah battery can be enough (2S-22g / 3S-32g!
next level can be?
Bottom is 3mm Top is 1,5mm bcus weight of motor is more than 5gramm and needs more power like 550/650 mah and weight is over 50gramm!
If you need cadx file of bottom plate then msg me!
Very interesting! Have you tried any other motors on this frame?
yes...not public them yet...
https://rotorbuilds.com/build/33481
https://rotorbuilds.com/build/33752
https://rotorbuilds.com/build/33753
Ok, so of the 1103, and the two 1202's that you tried, which are your favorites? I see that you moved to 3s for all the new motors, do you miss the 2s setup at all?
NOW I am able to answer... for me better setup is MAMBA 1202/6500KV version! with 3inch is flying very atrctive but less volt drop situation! Any other setup with 7500 or 8000 or 9000KV... they are flying a little better but volt drop is fast comming and less bettery life, shorter flytime...