First build - clean and fast 130mm/3" prop

By Rhygin on Jun 20, 2017

4  439  0

First start to finish build! Wanted a durable and "protected" 3" that was somewhat of a proven design. Ultimate power and maneuverability was not the goal, but it will really scream on 4s and is plenty on 3s for me at this point. This frame is made for the full-size RunCam but I used a mini and had to drill a hole in the side plates to move the camera forward as I was seeing a lot of carbon fiber. Did not sure the PDB with the kit.

Photos

Discussion

Sign in to comment

Guides & Reviews

28 2,465  33
28 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
26 6,964  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more