This build is light-weight weighing in at 350g
This can run on 4s-6s... with TONS of power!!
The OSD displays elapsed time, pack voltage, amp draw, and mah used.
Lumenier RXL Frame
Lumenier Lux V2 FC
RRosd Pro PDB
KISS esc's
Cobra 2204 1960KV motors
Runcam Arrow V2 fpv Cam
Aomway video transmitter with TBS Triumph antenna.
DAL 6" Tri props
Great 3d antenna mounts and great 3d forever tubes antenna holders.
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Very cool. Would you recommend those motors in particular for a 6 inch build or do you have any other recommendations?
These are great motors and this is a 6" build. A few years back these motors had problems with the magnets separating but I've used them in several builds without a problem in the last year. The Tmotor F60 2200kv is another motor I use on 6" builds. The new Efaw motors are great also and I have a 7" build here you can look at with them installed.
I just looked at your 7 inch build. It's amazing! I really enjoy seeing your builds. Thanks for sharing.