new 4 inch super light racer (sub 250g)
The Ori 4in1 25A ESCs from Airbot Shop fits this frame but i had to install them with XT60 on the front side of frame and with xt60 cables coming to the back , because other way (correct way) the 8 pin cable that connects ESC to FC wont let the fpv camera fit ( it also fits using the ESCs with XT60 on the left/right side of the frame but the FC USB will face the front or Back of the frame so i opted to install them with XT60 coming from the front of frame , you can check the Photos)
Runcam micro & VTX are both connected to Omnibus f4 nano v3 BEC (5v) no problems at all , great FC !!
These Ori 4in1 25A ESC from Airbot Shop are great , no problems so far with 4045 dual blade props and tornado 1407-3600kv , and by the way im not using any External capacitors .
AUW = 138g (without lipo)
AUW = 248g with tattu 850mah 4S 75C
Im using betaflight 3.2 , Dshot600 ,dynamic filter PT1 on omnibus F4 nano V3 and Blheli 16.63 on Ori 25A 4in1 ESCs (Soooo SMOOTH )
maiden done and i love this racer , these brotherHobby Tornado 1407-3600kv are so good !!!
3S Lipo
.
Frame |
quattuor v2 152 4 inch 3mm kit without hardware
(2 builds)
Armattanproductions.com
|
$26.78 |
Flight Controller |
OMNIBUS F4 Nano v3 with LC filter
(9 builds)
Store.myairbot.com
|
$35.99 |
ESCs |
Ori 4in1 ESC 4x25A 2020
(2 builds)
Store.myairbot.com
|
$39.99 |
Motors |
4 x Brotherhobby Tornado T1 1407 3600KV 4S Racing Edition Brushless Motor for FPV Racer
(193 builds)
Banggood.com
|
$67.96 |
Propellers |
Kingkong 4045 PROPS CW/CCW (10 PAIRS)
(9 builds)
Catalystmachineworks.com
|
$6.50 |
FPV Camera |
RunCam Micro Swift 600TVL 2.1mm IR Blocked 1/3 CCD FPV Camera PAL/NTSC 5.6g
(192 builds)
Banggood.com
|
$29.99 |
FPV Transmitter |
Banggood.com
(37 builds)
Banggood.com
|
See Site |
Receiver |
Frsky XM+ Micro D16 SBUS Full Range Mini Receiver Up to 16CH for RC FPV Racing Drone
Banggood.com
|
$13.69 |
Batteries |
Tattu 850mAh 14.8V 75C 4S1P Lipo Battery Pack with XT60
(3 builds)
Gensace.de
|
See Site |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
nice job! and a great auw too!
If you can be bothered to swap your lipos to xt30s and shorten the battery leads too you can easily shave another 4-5g
That 4in1 looks fancy, hope it fits ok!
thanks , and congrats on the Nice frame :)
yep Xt30 is lighter but i used the new XT60U its only 2g (XT60 = 3/4g ----- XT60U = 2g --- XT30 = 1g )
the ori 4in1 25A fits in the frame but i had to install them with XT60 on the front side of frame with xt60 cables coming to the back , because other way the 8 pin cable that connects ESC to FC wont let the fpv camera fit ( it also fits using the ESCs with XT60 on the left/right side of the frame but the FC USB will face the front or Back of the frame so i opted to install them with XT60 coming from the front of frame)
I updated the Photos showing how i install the ESCs.
Cheers! and thats sweet I had never seen an xt60u before, decent weight if it handles the same current as a regular xt60
Edit: that esc is tight! good job making it all fit, its a challenging build but I wanted this frame as small as possible to be as light as possible