MRM Scythe modded

By q-ratz on Oct 30, 2017

3  116  0

I took the MRM Scythe frame and removed the carbon parts connecting the 4 arms in a box form. This made the frame much faster and more nibmle, probably due to the reduction of drag.

Photos

Part List

Frame

MRM Scythe 220mm X Frame – MultiRotorMania (6 builds)
Multirotormania.com
$39.99

Flight Controller

Fury F3 Flight Controller - Quad Questions
Quadquestions.com
$34.00

ESCs

4X Racerstar MS Series 25A ESC BLHeLi_S OPTO 2-4S Support Oneshot Multishot for RC Drone FPV Racing (8 builds)
Banggood.com
$30.99

Motors

4 x BrotherHobby Tornado T1 2205 2300kv Brushless Motor (10 builds)
Getfpv.com
$79.96

Propellers

CA$9.99 10% 10 Pairs Kingkong / LDARC 5040 5x4x3 3-Blade Single Color CW CCW Propellers for Racing Drone RC Parts from Toys (79 builds)
Banggood.com
$7.30

FPV Camera

Banggood (130 builds)
Banggood.com
$15.45

FPV Transmitter

Eachine ET526 5.8G 40CH 25mW/200mW/600mW Switchable FPV Transmitter
Eachine.com
See Site

Antenna

FOXEER 5.8G Circular Polarized Omni TX/RX Antenna (Mini Version) RHCP SMA PA1325 - Red - Heli-Nation (5 builds)
Heli-nation.com
$8.00

Power Distribution

RROSD Pro V1 (25 builds)
Redrotorrc.com
$10.00

Radio

FrSky Taranis X9D Plus 2.4GHz ACCST Radio & X8R Combo w/ case (Mode 2) (54 builds)
Getfpv.com
$244.99

Goggles

Fat Shark Dominator HD2 Terminator Edition FPV Goggles (4 builds)
Getfpv.com
$399.99

HD Camera

GoPro HERO5 Session (267 builds)
Getfpv.com
$199.99

HD Camera

Foxeer 4K Box Action Camera SuperVision (10 builds)
Foxeer.com
$169.99

Misc Parts

PANASONIC FM Series 1000UF 35V LOW ESR CAPACITOR FOR ESC NOISE REDUCTION (36 builds)
Taco-rc.com
$1.49

Misc Parts

2 x Diatone 3-4S LED Decoration Board Strip Set For 250 Class Frame (4 builds)
Banggood.com
$2.16

Video Receiver

ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module (145 builds)
Getfpv.com
$149.99

Radio Module

TBS Crossfire Micro TX V2 (115 builds)
Team-blacksheep.com
$69.95

Battery Charger

iSDT SC-620 500W 20A MINI Smart LCD Battery Balance Charger (3 builds)
Getfpv.com
$63.74

Soldering Iron

TS100 Ltkolben KIT + TS-I inkl. XT60 Kabel (171 builds)
Flyingmachines.de
$76.40
Show stores (11)

Discussion

Sign in to comment

Guides & Reviews

28 1,450  11
22 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 4,945  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more