Little Green Machine
By mstrsplntr on Apr 11, 2019
This is my first semi-premium build. The only real compromise I made was the vTX and that was because RDQ had all the parts in stock and I didn't want to wait to order a Unify from somewhere else.
Other Parts Required for build:
- QTY 4 x 20mm M3 cap head screws for stack
- QTY 16 x 7mm M3 cap head screws for motors
- QTY 4 x 5mm Female-Female nylon black standoff
- QTY 1 x XT60 Male connector
- Misc 14 & 24 AWG Silicone Wire
- Misc: Scotch Extreme mounting tape, zip ties, heat shrink tube, electrical tape.
Other Misc notes: Will be getting 3D printed mounts for GoPro and possibly for antennas.
3/15/2019: Completed assembly and programming. Maiden flight was a success. More pictures to come.
Photos
Part List
Show stores (5)Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
sweet rig!
Thanks man!