MB Epic 262 v2 - 6inch

By pete_oz on Mar 29, 2019

42 92 6

This is a low profile long-range quad that can carry large (up to 140mm long) top mounted battery.


Leukerbad, Swiss Alps	Painted Desert, Aus


10km round trip	Virtual Flyover

Alt Tag

Components used in this build :

Multicopter Builders Epic 262 v2 6inch (frame)
Matek F722-SE FC
Multicopter Builders Primo 2208 2350kv motors
Spedix GS35 (35A) ESCs
Foxeer Predator Mini v3 front camera
Foxeer Predator Micro v3 rear camera
TBS Unify Pro HV VTx
TBS Crossfire Nano Diversity Rx
TrueRC AXII Long SMA antenna
Ublox M8N GPS
Hellgate buzzer
External microphone

Alt Tag

I'll be using tri-blades props :

DAL 6045
Master Airscrew 6045 RS
Gemfan Flash 6042
Gemfan Flash 5552

Alt Tag

Batteries :

Bonka 1800mAh 75C 5S
Bonka 2200mAh 75C 5S
Dinogy 1800mAh 80C 5S
Hyperion 2400mAh 45C HV 5S
Hyperion 2800mAh 45C HV 5S
Swaytronic 4000mAh 35C 5S

Alt Tag

This quad is configured for 3D flying and carries rearview inverted camera. With this setup it's possible to fly inverted and backwards thereby utilizing the HD camera (Gopro Hero6/7) as a chase camera for additional perspective.
Matek F722-SE allows to connect two FPV cameras that can be switched between by a radio switch (radio is required to be configured for inverted flying by inverting Roll and Yaw channels).

AUW with GoPro Hero6 and 1800mAh 5S battery is 860g.
Built as a fast mid/long range surfer for aggressive mountain flights.

Photos

Part List

Frame	MB Epic 262 V2 (11 builds) Multicopterbuilders.com	$70.00
Flight Controller	Matek F722-SE F7 Flight Controller F722-SE (78 builds) Phaserfpv.com.au	$89.95
ESCs	4 x Spedix GS35 35A 2-6S 32BIT Dshot 1200 ESC (4 builds) Phaserfpv.com.au	$91.80
Motors	4 x MB Primo 2208 2350kv (10 builds) Multicopterbuilders.com	$75.96
Propellers	Gemfan Flash Durable Tri Blade 6042 6 (8 builds) Phaserfpv.com.au	$5.95
Propellers	DAL TJ6045 Tri-Blade Regular (11 builds) Dalprops.com	$2.69
FPV Camera	Foxeer Predator Micro V4 Camera 4:3 16:9 1000TVL WDR 5-40v 1.7mm HS1225 (14 builds) Phaserfpv.com.au	$60.95
FPV Camera	Foxeer Predator Mini 5 Camera 4:3 16:9 1000TVL Super WDR PAL HS1251 (106 builds) Phaserfpv.com.au	$58.95
FPV Transmitter	TBS Unify Pro 5G8 HV - RACE (SMA) (596 builds) Phaserfpv.com.au	$42.95
Antenna	TRUERC AXII Antenna with SMA (Long Version) (3 builds) Phaserfpv.com.au	$19.95
Receiver	TBS Crossfire Diversity Nano RX (2 builds) Phaserfpv.com.au	$79.90
Batteries	Bonka 2200mAh 75c 5s XT60 Lipo Battery BKU2-2200/75-5S/GR [DG] (3 builds) Phaserfpv.com.au	$85.95
Misc Parts	Ublox M8N GPS Module for INAV (NO COMPASS) (4 builds) Phaserfpv.com.au	$25.95
Misc Parts	HellGate FPV Buzzer - HellGate FPV Buzzer (18 builds) Buzzer.hellgatefpv.com	$21.50
Misc Parts	Banggood.com (8 builds) Banggood.com	See Site

Show stores (5)

Like Copy Part List Follow pete_oz

Discussion

ivan fpv Feb 27, 2021

helo sir can you please tell me what part is the part with the heat sink on the matterhorn build

1stSlave May 06, 2020

Pete, do you have the 3d Print files for the all the parts you used? Could you share them?

Irish126 Jul 05, 2019

Sick build. Thanks for shaing with us. Are you using 2 immortal Ts with the CRSF diversity nano? Unclear what is inside the green antenna straw. What range and flight times have you pushed this to? Happy flying ....

pete_oz Jul 28, 2019

thank you. on the diversity nano I'm using 1x immortal-T (horizontally) and a 1x home made whip antenna (vertically, in that green straw). I didn't push it too far yet, furthest I went was 3.5km away with 1km altitude gain on 2800mAh 5S battery. flight time is hard to tell, depends on so many factors, normally I use 2200mAh 5S battery and pushing hard gives me about 5min in the air. on larger battery packs and flying conservative I should be able to stay in the air for 10min I guess.

pete_oz Apr 18, 2020

been flying with this now for over a year, it can carry 4200mAh 6S Li-Ion battery with easy and with this setup (incl. GoPro Hero 7) I can fly 6km out with 2km altitude gain, the flight took 14 minutes.