Realacc purple215

By KM|fpv on Aug 13, 2019

0  45  3

an extremly wrong build, supposed to be a fast agile racer turned to be a cruiser.

as i was building every miniKwad mainly as a 3S capable kwad, i always choose parts which can handle 2-4s lipos. but this build is different, the motors support up to 6" props but only up to 3s.

What's left to say: I've done the rssi mod on all my fs-a8s and have no issues (some do remember the rcgroups discussion)


Part List


Anniversary Special Edition Realacc Purple215 215mm 4mm Arm Thickness Carbon Fiber RC Drone FPV Racing Frame (2 builds)

Flight Controller

Omnibus F3 OSD (3 builds)


4 x Online-Shop 1 PCS/2 PCS/4 PCS Mini 20A ESC BLHeli_S OPTO 2-4 S Lipo BLHeli- S esc Für FPV Rennen QAV Quadcopter Rahmen Drone FP


4 x Online-Shop EMAX MT1806 2280KV CW Brushless Motor für multi-hubschrauber 250mm QAV250 FPV multirotor Quadcopter | Aliexpress Mo


2 Pairs Emax Avan Scimitar 5030 5x3.0x3 3-Blade Propeller 2CW+2CCW Red


2 Pairs Emax Avan Scimitar 5028 5 Inch 5x2.8x3 5x2.8x4 3-blade 4-Blade Propeller for RC Drone FPV Racing

FPV Camera

Foxeer XAT600M HS1177 CCD - Rotorama (6 builds)

FPV Transmitter

DYS MI200MW 25/200mW Switchable 5.8G 40CH FPV Transmitter (11 builds)


Realacc 5.8G 5dBi 50W Omni Directional Omni FPV Pagoda Antenna LHCP/RHCP SMA/RP-SMA For FPV RC Drone (48 builds)


Flysky FS-A8S FS A8S V2 2.4G 8CH Mini Receiver with PPM i-BUS SBUS Output (91 builds)


2 x TATTU 1300mAh 3s 75c Lipo Battery (5 builds)


2 x BRAINERGY Lipo Akku 1350mAh 3S 45C 11.1V LiPo Akku XT60 Plug - (2 builds)

Power Distribution

Realacc/Matek PDB-XPW 5V 12V Dual BEC PDB Built-in 140A Current Sensor with XT60PW Socket (15 builds)


Flysky FS-NV14 2.4G 14CH Nirvana Transmitter with iA8X Receiver 3.5 Inch Display Open Source (13 builds)


FatShark Dominator V1 Headset System Goggles Video Glasses 640 X 480 VGA

HD Camera

Hawkeye FIREFLY Q6 Airsoft 1080P HD Multifunktions-Sportkamera für FPV

Misc Parts

Geekcreit® 3.3V 5V XTW ST-LINK V2 STM8 / STM32 Simulator Programmer Downloader Debugger 500MA Fuse Short Circuit Protection Alu

Misc Parts

10pcs Multimeter Wire Lead Test Hook Clip Electronic Mini Test Probe Set Red White Blue Black Purple For Repair Tool

Video Receiver

Eachine PRO58 RX Diversity 40CH 5.8G OLED SCAN VRX FPV Receiver for FatShark Goggles (22 builds)

Battery Charger

Online-Shop Ultra Power UP-S6 6x4,35 watt DC 1 s Balance Ladegerät Entlader Lade Hub 6-in-1 ladegerät für RC Micro MX MCPX Li

Battery Charger

Online-Shop Ursprüngliche SKYRC IMAX B6 MINI Balance RC Ladegerät/Entlader Für RC Hubschrauber Wieder spitze NIMH/NICD Flugze

Soldering Iron

MINI TS100 Digital OLED Programable Interface DC5525 Soldering Iron Station Built-in STM32 Chip (74 builds)


FatShark Face Plate Frontplatte V2 mit Lüfter für die Fatshark Dominator kaufen |


FatShark 18650 Li-Ion cell Headset Battery Case (4 builds)
Show stores (8)


Sign in to comment

KristofFPV   6 days ago  

Hello, how is your Flysky FS-A8S receiver doing? What range do you get on it, what radio do you have with it?

KM|fpv   6 days ago 

I really don't have any issues with the fs-a8s receiver. I also have done the rssi mod on all my fs-a8s and the fs-x6b.
I have the flysky nirvana nv14, with the opentx image provided by flysky on their website.

KristofFPV   4 days ago 

Thanks for the info. Greetings

Guides & Reviews

27 2,772  20
21 days ago

You've probably heard the term "Cinewhoop". Traditionally it's a 3" ducted quad capable of carrying a GoPro Hero7 Black at a low 10 degree angle. More recently the term "Cine" has been applied to a number of RTF quads ranging from 85mm to 3". They all focus on their HD capability, but none compare to the stabilization of Hypersmooth (only available on the Hero7 Black). This is what really offers that..

Read more
40 5,263  40
May 31, 2019

A couple years ago I built the TransTEC Frog and since then I've been patiently waiting for another TransTEC frame to catch my eye. Fast forward to today and the TransTEC Laser S is that frame. It's a 82g racing frame that features 6mm arms, a TPU micro cam mount, 30.5mm and 20mm stack mounts and 3K carbon and 7075 hardware. My goal here was to build a high quality 6S racer at a reasonable price. I'd..

Read more