Working on the sleeper of the year.
20 May 2017
Received Kiss CompactCTRL, and Diatone SP3 performed fitting test.
20 May 2017
Soldered on RX, VTX, OSD TX RX, and performed fitting test with hardware and canopy perfect fit
Now just waiting on my 3D printer mount for the run cam mini, and motors come in Monday.
Photos
Part List
Frame |
RotorX RX122 Atom V3 Frame Kit
(4 builds)
Desertaircraft.com.au
|
See Site |
Flight Controller |
KISS CompactCTRL CC All-in-One (FC + 16A ESC x4)
(42 builds)
Getfpv.com
|
$95.99 |
Motors |
4 x RCX H1407 3200KV Micro Outrunner Brushless Motor
(21 builds)
Getfpv.com
|
$47.96 |
Propellers |
Lumenier 3x4x3 V2- Propeller (Set of 4 - Transparent Black)
(15 builds)
Getfpv.com
|
$2.24 |
FPV Camera |
RunCam Micro Swift
(192 builds)
Pirofliprc.com
|
$29.99 |
FPV Transmitter |
Diatone SP3 Stackable VTX with OSD and 600mw, 200mw, 25mw Power Output - V1.3 (latest version)
Racedayquads.com
|
$34.99 |
Antenna |
IBCrazy 5.8GHz Airscrew Race Spec Antenna (RHCP)
(14 builds)
Getfpv.com
|
$18.99 |
Receiver |
Crazepony Strap and FS A8S Mini Receiver 8CH, PPM i-BUS SBUS Output, for Flysky FS i4 i6 i6S i6X TM10 TM8 Transmitter Control
Amazon.com
|
$16.99 |
Batteries |
7 x Tattu 3S 850mAh 75c Lipo Battery
(4 builds)
Fpvheadquarters.com
|
$98.00 |
How do you mount your runcam micro?
You can 3D print it from here
Or it it from here http://www.rc-drones.com/Rotorx-Atom-V3-Micro-Swift-Camera-Mount-28-Degrees-In-ABS_p_1751.html
Goddammit now I wanna build the atom