1s Tiny Shark Build. After building my 1st TinyShark https://rotorbuilds.com/build/7678 I knew I needed a backup because I am not ready to have downtime.
Minor differences with this build. I used the Lumenier prebuilt FC and ESC stack and I am using the Gemfan 2040 props.
The frame is a Falcon Multirotors TinyShark which should be available soon.
Photos
Part List
Frame |
Tinyshark
(25 builds)
Falconmultirotors.com
|
$25.00 |
Flight Controller |
Lumenier tinyFISH Power Stack F3 16x16mm Flight Controller + 4A 4-in-1 ESC + FrSky Rx
(6 builds)
Getfpv.com
|
$35.99 |
Motors |
Crazepony 4pcs BR1103 10000KV Brushless Motors for 50 80 100 Multirotor Quadcopter Drone Red
(6 builds)
Amazon.com
|
See Site |
Propellers |
Gemfan Hulkie Green 2040 Durable 3 Blade - Set of 8 (4CW, 4CCW)
Getfpv.com
|
$3.18 |
FPV Camera |
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
(23 builds)
Amazon.com
|
$21.98 |
Note: I think those are the Gemfan Hulkies? https://www.getfpv.com/gemfan-hulkie-blue-2040-durable-3-blade-set-of-8-4cw-4ccw.html
Gemfan also has "Flash" props of various sizes, but those sure look like Hulkies.
Good call. Fixed.