This thing flys so good..
I have been wanting to do a Kiss setup for ever.
I think it flys better then my raceflight and betaflight setups
I should have left out the press nuts in the Mr Steele PDB. they are not needed with the Reverb frame..
Wish it would stop raining so i can fly...
Frame |
Reverb FPV Frame
(6 builds)
Impulserc.com
|
See Site |
Flight Controller |
KISS FC v2 32bit Flightcontroller
Kiss.flyduino.net
|
See Site |
ESCs |
4 x KISS ESC 24A re – 32bit Electronic Speed Controller
Kiss.flyduino.net
|
See Site |
Motors |
4 x | DongYang Smart Technology Co.,Ltd
Dys.hk
|
See Site |
Propellers |
DP-5X4.3X3V1S-PC
Hqprop.com
|
See Site |
FPV Camera |
RunCam Split 2
(2 builds)
Shop.runcam.com
|
$79.99 |
FPV Transmitter |
TBS Unify Pro 5G8 V3 (SMA)
(154 builds)
Team-blacksheep.com
|
$39.95 |
Antenna |
TBS Triumph SMA (RHCP 2pcs)
(369 builds)
Team-blacksheep.com
|
$39.95 |
Receiver |
TBS CROSSFIRE NANO RX (SE) - FPV LONG RANGE DRONE RECEIVER
(412 builds)
Team-blacksheep.com
|
$29.95 |
Batteries |
Tattu R-Line Version 2.0 1550mAh 100C 4S1P High Voltage Lipo Battery Pack with XT60 Plug
(8 builds)
Genstattu.com
|
$32.99 |
Power Distribution |
Mr Steele Alien PDB Kit for KISS with OSD and Mic
(4 builds)
Impulserc.com
|
$61.00 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Hi
It's compatible the Mr steel pdb on reverbe ? I don't know?
yeah the steele PDB fits perfectly. you could leave the press nuts out of the PDB since they don't get used, it would save the extra weight.
Thank you for your answer, I never build a kiss thing my friend would change with me against betaflight setup I said why not but I am not sure if the pdb Mr steel fit with my reverb, but thankfully you confirmed that to me, why they did 2 pdb then (wolf and Mr steel tho)?
i'm sure the wolf PDB fits a lot better. I built this when the reverb frame just came out so I don't even think they made the wolf PDD at that time
Thank you man I appreciate it