For maiden test flight click here

This is a low profile mid-range/long-range quad that can carry large (up to 140mm long) top mounted battery.

Components used in this build :

• Multicopter Builders Epic 262 v2 (frame)
• CL Racing F4S v1.5 FC
• Multicopter Builders Primo 2207 2450kv motors
• Spedix GS35 (35A) ESCs
• Foxeer Predator Mini camera
• TBS Unify Pro HV VTx
• TBS Crossfire Nano Rx
• TrueRC AXII Long SMA antenna
• Ublox M8N GPS
• Hellgate buzzer
• External microphone

I'll be using 6inch and 5.5inch props :

• Gemfan Flash 6042
• Gemfan Flash 5552
• Master Airscrew 6045 RS

Batteries :

• Bonka 1800mAh 75C 5S
• Bonka 2200mAh 75C 5S
• Dinogy 1800mAh 80C 5S
  (potentially the frame can fit up to 4000mAh battery)

I decided to install the arms on top of the main plate, this reduced the stack height to 15mm but with AIO FC there is enough space (standard build is with the arms below the main plate). I just prefer as low profile build as possible for low CG at the cost of props in the view of HD camera (it's actually not that bad running at 40 degrees angle).

AUW with GoPro Hero6 and 1800mAh 5S battery is 820g.
Built as a mid/long range surfer it's actually quite agile quad even on a tight track.

For maiden test flight click here