Decided to put the DJI kit to my Source One frame.
I designed a special air unit mount and antenna mount to have a clean build.
Used a 20mm standoffs to have a slammer look.
Camera mount, air unit mount, antenna mount, Immortal T mount, motor wire covers and standoff cover: https://www.thingiverse.com/thing:4074601
Arm end covers / motor protectors are not my design, can be found here: https://www.thingiverse.com/thing:3756936
Raised about 8mm the Gopro mount to have more clearance to props, my remix can be found here: https://www.thingiverse.com/thing:4074610
Frame |
TBS Source One 5" Frame V3
Drone-fpv-racer.com
|
$39.89 |
Flight Controller |
ESC F55A Pro II T-Motor - 3/6S -BLHeli_32 4in1
Drone-fpv-racer.com
|
$96.87 |
ESCs |
T-Motor F4 HD Flight Controller
Drone-fpv-racer.com
|
$54.44 |
Motors |
4 x Moteur Lethal Conception 2207.5 - 1766kv
Drone-fpv-racer.com
|
$106.20 |
FPV Camera |
Caméra DJI FPV
(94 builds)
Drone-fpv-racer.com
|
$71.53 |
FPV Transmitter |
Module de l'Unité Aérienne DJI FPV
(87 builds)
Drone-fpv-racer.com
|
$132.16 |
Antenna |
Antennes pour Unité Aérienne DJI FPV - MMCX90° (2pcs)
Drone-fpv-racer.com
|
$18.19 |
Receiver |
TBS Crossfire Nano RX (SE)
(377 builds)
Drone-fpv-racer.com
|
$41.10 |
Batteries |
Batterie Lipo Tattu R-Line 6S 1300mAh 120C - Version 3.0
(4 builds)
Drone-fpv-racer.com
|
$48.49 |
FPV has had quite a journey. Just a few years ago we started racing drones around a track and doing flips over trees, but professional cinematic FPV is a more recent development. DJI has always owned the drone photography market, but smaller acrobatic drones are starting to enter the market. They have the advantage of close proximity flight indoors and around people. There's more artistic freedom and..
Read moreFor the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..
Read more
Do you see props on this thing with the camera further out in front?
yes props are a bit in view
Thanks for the quick response! Good to know before i start to build.