Proffesionaly built 7'' DJI Ready to fly! I have personally designed and built hundreds of drones for various companies such as lumenier/Getfpv.
7” QAV-R2
Ethix konasty 2407 1739 motors
HQ 7” props
Tmotor 55a 4-1esc
Race flight millivolt
DJI fpv system!
Long range axiis antennas
Custom 3D prints
Voltage regulator for Air unit allowing 6s
Built, programmed and test flown!
$400 + shipping
Frame |
Lumenier QAV-R 2 Freestyle Quadcopter Frame
(19 builds)
Getfpv.com
|
See Site |
Flight Controller |
RaceFlight MillivoltOSD 20x20 Flight Controller - FlightOne
(10 builds)
Racedayquads.com
|
$44.99 |
ESCs |
T-Motor F55A Pro II 55A 3-6s BLHeli32 4-in-1 ESC w/ BEC
(5 builds)
Getfpv.com
|
See Site |
Motors |
4 x ETHIX Konasty 2407 2200kV Brushless Motor
(8 builds)
Airbladeuav.com
|
$103.96 |
Propellers |
HQ Prop Durable 7x4x3 Tri-Blade 7" Prop 4 Pack - Grey
(20 builds)
Racedayquads.com
|
$3.99 |
FPV Camera |
Caddx DJI Digital HD FPV Air Unit Kit
(293 builds)
Getfpv.com
|
See Site |
Antenna |
Lumenier AXII 2 5.8GHz Long Range SMA Antenna - RHCP or LHCP
(53 builds)
Racedayquads.com
|
$19.99 |
Batteries |
XILO 1250mAh 6s 75c Lipo Battery
(11 builds)
Getfpv.com
|
$34.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
With all due respect to having designed and built many quads... your photos show standard height prop nuts where the motor shaft thread doesn't even begin to engage the nylon self-locking insert. That's dangerous and quite sloppy.