Transferred the guts of my Pico X to the Ascent frame so I could use a Micro Swift. It took quite a bit of planning to fit the stack into the frame.
Frame |
FlexRC FPV Racing Drones | FPV Multicopter Store | Quadcopter Parts
(101 builds)
Flexrc.com
|
$52.50 |
Flight Controller |
OMNIBUS Betaflight 3.1 F3 6DOF Mini Flight Controller 20x20mm Integrated OSD Built-in 5V BEC
(11 builds)
Banggood.com
|
$21.99 |
ESCs |
Cicada 4-in-1 10A BusyBee2 Tiny BLHeli_S DShot ESC
(33 builds)
Airbladeuav.com
|
$34.99 |
Motors |
DYS BE1104 6500kv Brushless Motor / 4PCS
(10 builds)
Flexrc.com
|
$41.85 |
Propellers |
Gemfan PC 4 Blade - 2035 - Clear (2CW, 2CCW)
(3 builds)
Readymaderc.com
|
$0.99 |
FPV Camera |
RunCam Micro Swift - NTSC - www.readymaderc.com
(5 builds)
Readymaderc.com
|
$29.99 |
FPV Transmitter |
Banggood.com
(37 builds)
Banggood.com
|
See Site |
Receiver |
FrSky XM+ XM-Plus D16 Receiver
(1149 builds)
Readymaderc.com
|
$12.99 |
Batteries |
5 x Turnigy nano-tech 460mah 3S 25~40C Lipo Pack
(2 builds)
Hobbyking.com
|
$35.10 |
Do you have any links to the 3d printed components you used? Just got this frame and have a similar build. Your build is super clean and was trying to track down the 3d parts you have. Thanks!
The boots are on thingiverse here: https://www.thingiverse.com/thing:2343148
I haven't published the other parts since they're still kind of a work in progress. I'll try to get them up soon.
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Nice! Thinking of doing something similar. Transfer all the Lizard95 components to this frame so I can run a Runcam Swift Micro. Thanks for the inspiration. :-)
Thats what I've been searching around for. I was building a new camera frame for my lizard for the micro sparrow camera I have but have given up, theres no wiggle room with the lizard frame unless you want to keep stacking.