Sweet little flier.... 2.3 lense is a must, originally I had a 2.1 lense and there was just to much standoffs in view for my subpar flying
soon I'll be getting some bigger motors. I tried it on 1104 & 1106 motors but it was just to heavy and motors were getting to warm
Frame |
Neato Pipsqueak 3 Inch
(5 builds)
Neatoframes.com
|
$49.00 |
Flight Controller |
FuriousFPV PIKO F4 16MB Black Box Flight ControllerSKU: FPV-PIKOF4
(4 builds)
Furiousfpv.com
|
$39.95 |
ESCs |
4 x Spedix ES20 Lite 2-4S 20A ESC
(42 builds)
Racedayquads.com
|
$35.96 |
Motors |
4 x EMAX RS1306 4000K Brushless Motor CW
(19 builds)
Getfpv.com
|
$51.96 |
Propellers |
GemFan Flash 3052-3 (2CCW-2CCW) Choose Color
(37 builds)
Pirofliprc.com
|
$2.99 |
FPV Camera |
RunCam Micro Swift 600TVL 2.1mm / 2.3mm IR Bloqué 1/3 CCD Caméra FPV PAL / NTSC 5.6g
Banggood.com
|
$33.99 |
FPV Transmitter |
FuriousFPV PIT MODE Adjustable 25/200mW INNOVA V4 OSD/VTXSKU: FPV-INNOVAV4
Furiousfpv.com
|
$39.95 |
Receiver |
XSR-M FRSKY Receiver
(25 builds)
Racedayquads.com
|
$19.49 |
Batteries |
FlexRC FPV Racing Drones | FPV Multicopter Store | Quadcopter Parts
(101 builds)
Flexrc.com
|
$52.50 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
How did you mount the XSR-M? I had to sandwich mine with 3M tape in the middle of my stack. Couldn't get it to fit on the frame because I mounted my ESC board really low.
Yes I mounted between the stack and top plate