Catalyst Machineworks SL4R

By Flydynamics on Oct 26, 2017

4  194  1

In September 2016 I started experimenting a new 4" format using 1407-3600Kv motors with an extremely light set-up.
After weeks of bothering CMW to design a specific frame for this format, the SL4R came to life. Since the release of the SL4R, the new generation of 4" machines became a bit more popular than the old heavy 180 frames.
Weight - 144g

Discussion

Sign in to comment

Indy   Jun 15, 2018  

nice build! 4 inch props quads are far less popular than 5 inch or even 3 inch but they are the best ;)

Guides & Reviews

28 1,365  11
20 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 4,888  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more