Super Whoop V2

By peacemaker on Feb 08, 2018

7  742  3

I’ve found a better way to build it. Keeping the weight under 29g is important to the flight characteristics. To install the motors rotate them and run the screws through the triangles. The center holes need to be drilled out to clear the bearings. Remove the female connector on the motor pads.

I used the b06 canopy and props.


Sign in to comment

Alloy907   Mar 11, 2018  

Building very similar drone. Had bad experience with Boldclash 0603 motors, going to replace them with Sunnysky0703. What is your flight time? How quiet are these motors?

peacemaker   Mar 11, 2018 

Flight time is about 4:30. The motors are very loud. The sunny sky motors have a different bolt pattern. So you’ll have to use the spaces between the holes as well as drill out the center hole.

MicroManiac   Feb 08, 2018  

Great idea.

Guides & Reviews

27 1,967  27
22 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,792  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more