A-MAX Standar-II 220
Uuuugh, I love this low rider style frames :-)
I replaced the original steel screws with titanium ones to save some more grams ;-)
On top of that, I use aluminium screws for Motors. This saves easily up to 12g and I never had any issues.
Mounting buzzers is often a challenge, in order to mount them fix and also enable the sound spread freely.
So, I came across the same approach I'm using for mounting the LEDs. I put the buzzer in a red heat shrink
and closed both ends with pliers. After that, I've punched 5mm holes into the heat shrink ends
and imposed it on the spacers.
The AKK FX2 is great, because supports PIT and Tramp HV compatible setup. Now I can switch channels via my Taranis QX7 :-)
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
New Message for nitram509