By TaterrsFPV on Feb 14, 2018

10  749  5

First time user here, but look forward sharing and discussing all things FPV. This is my first 20x20MM Stack Build. Cant wait to get it outdoors!!


Part List


iX2 V2 2.5 inch Micro FPV Drone Quadcopter Frame Kit (2 builds)

Flight Controller

Matek F405-Mini 20x20 Flight Controller (7 builds)


DYS F18A Mini 4-n-1 20x20 ESC (4 builds)


4 x EMAX RS1106 II 6000KV Micro Brushless Motor (34 builds)


Gemfan Flash 2540 Tri-Blade 2.5" Prop 8 Pack - Choose Your Color (143 builds)

FPV Camera

Foxeer Arrow Micro Pro 600TVL CCD FPV Camera w/ OSD (2.1mm or 1.8mm) - Choose Your Color & Lens (228 builds)

FPV Transmitter

Aomway TX004 Mini 20x20 0-200mW VTX w/ Tramp Protocol - U.FL (6 builds)


RDQ 5.8GHz U.FL Dipole FPV Antenna - Linear (32 builds)


Spektrum Quad Race Serial Receiver w/Diversity (5 builds)


Tattu 11.1V 75C 3S 450mAh Lipo Battery Pack with XT30 plug


FrSky Taranis QX7S 2.4GHz RC Transmitter - Carbon or Blue (48 builds)


Fat Shark Dominator HD2 Terminator Edition FPV Goggles (4 builds)

HD Camera

GoPro HERO5 Session (6 builds)
See Site

Misc Parts

Gardner Bender 1-in x 1-ft General-Duty Electrical Tape
See Site

Video Receiver

FuriousFPV True-D X (for Fatshark Dominators) - RedSKU: FPV-RX-TRUDX (2 builds)

Radio Module

FrSky R9M Module (67 builds)
Show stores (9)


Sign in to comment

ExtraProps   Mar 22, 2018  

Hey taters, like the build. Where is your Spektrum mounted, I don't see it in the pictures. Did you take it out of the case? PooperMcWank don't eat quads the props get stuck in your teeth.

TaterrsFPV   Mar 22, 2018 

Hey Extraprops,
Yes i completely decased the sat, and i know there is no picture, but it is sandwiched between the vtx and top plate.

ExtraProps   Mar 22, 2018 

Well done. I thought maybe stuck behind the camera. Good to know that there was just enough space up there. How was the frame held up?

TaterrsFPV   Mar 23, 2018 

Frame is awesome even for its size it is very robust.

P0operMcWank   Feb 15, 2018  

I don't need to mash em or anything. I eat them straight from the ground. I do stick em in stew on cold evenings. I don't have any builds yet because I'm indecisive and have anger issues. But I like the size of your build. I'll chew on it and maybe I'll finally do it.

Guides & Reviews

26 1,874  27
21 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,775  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more